www.abbiegregg.com
also see our recent projects and staff bios

recent projects

AGI Technical Documentation, GMP Compliance, and Auditing Projects

Project / Location / Date	Scope of Work
Sandia National Labs MESA Project Albuquerque, NM 2006	Readiness Assessment • Facility System Document Audit • MEMS, and Si CMOS Semiconductor Manufacturing Facility
Confidential Client San Jose, CA 2005-2006	Flat Panel Display Facility Start Up Consulting • Facility/Tool Install Design Review • Documentation and Training of Fab and Assembly Processes, Facilities, Environmental Health and Safety, and Cleanroom Protocol. • Created over 80 tool operations and maintenance specifications. • Created 16 facility systems operations and maintenance specifications.
Arizona State University Tempe, AZ 2005	Laboratory Security System • Created security policies, operations procedures and forms to manage the ASU Electronic Door Access System • Created Risk Assessment procedure to identify security hardware/software for a laboratory.
Arizona State University Tempe, AZ 2003-2004	Chlorine Emergency Response Plan • Risk Assessment of “worst case scenarios” (air modeling) of chlorine release incident, including off site consequence analysis and hazard analysis. • Provided recommendations for mitigation, containment, and alternate methods of chlorination. • Preparation of required plans and programs for storage of gas chlorine at both pools. • Training of the University team on developed plans/programs
Arizona State University Tempe, AZ 2003	Development of Select Agent Compliant Lab Startup Procedures • Facilitated Biosafety Committee • Biosafety Program Development • Biosafety Security Program Development. (App F BMBL)
Arizona State University Tempe, AZ 2003	Engineering Resource Center (ERC) Code Review • 136,000 sq.ft. Materials and Solid State Electronics Labs • 3,840 sq.ft. Class 100 Cleanroom, HPM Areas, and Labs • Cleanroom, Support Areas, and Tower Code Compliance Study • Recommendations • As-Builts for HPM Gas Area • Design of Renovations
Arizona State University Tempe, AZ 2003	Audit of Biosafety Level Labs • Comprehensive environmental, health, safety, protocol, equipment and facility documentation review • Authored Biosafety Manual
Motorola Life Sciences Tempe, AZ 2000-2002	Biochip Production Operations and Lab Expansion/Relocation • Project Management • GMP Compliance and Specification Development – Over 80 GMP Compliant Operations Specifications (including facility GMP policy and procedures)
PerkinElmer / EG&G Sunnyvale, CA 1999	• 500x500 mm Sensor Panel for x-ray imaging • Audit of facility for yield improvement
Optical Imaging Systems Northville, MI 1991-1995	• Specification, design and supervision of utility systems and fit-up of equipment. • Team coordination, quality assurance, and documentation.

Project / Location / Date

Scope of Work

Sandia National Labs MESA Project

Albuquerque, NM

2006

Readiness Assessment

• Facility System Document Audit

• MEMS, and Si CMOS Semiconductor Manufacturing Facility

Confidential Client

San Jose, CA

2005-2006

Flat Panel Display Facility Start Up Consulting

• Facility/Tool Install Design Review

• Documentation and Training of Fab and Assembly Processes, Facilities, Environmental Health and Safety, and Cleanroom Protocol.

• Created over 80 tool operations and maintenance specifications.

• Created 16 facility systems operations and maintenance specifications.

Arizona State University

Tempe, AZ

2005

Laboratory Security System

• Created security policies, operations procedures and forms to manage the ASU Electronic Door Access System

• Created Risk Assessment procedure to identify security hardware/software for a laboratory.

Arizona State University

Tempe, AZ

2003-2004

Chlorine Emergency Response Plan

• Risk Assessment of “worst case scenarios” (air modeling) of chlorine release incident, including off site consequence analysis and hazard analysis.

• Provided recommendations for mitigation, containment, and alternate methods of chlorination.

• Preparation of required plans and programs for storage of gas chlorine at both pools.

• Training of the University team on developed plans/programs

Arizona State University

Tempe, AZ

2003

Development of Select Agent Compliant Lab Startup Procedures

• Facilitated Biosafety Committee

• Biosafety Program Development

• Biosafety Security Program Development. (App F BMBL)

Arizona State University

Tempe, AZ

2003

Engineering Resource Center (ERC) Code Review

• 136,000 sq.ft. Materials and Solid State Electronics Labs

• 3,840 sq.ft. Class 100 Cleanroom, HPM Areas, and Labs

• Cleanroom, Support Areas, and Tower Code Compliance Study

• Recommendations

• As-Builts for HPM Gas Area

• Design of Renovations

Arizona State University

Tempe, AZ

2003

Audit of Biosafety Level Labs

• Comprehensive environmental, health, safety, protocol, equipment and facility documentation review

• Authored Biosafety Manual

Motorola Life Sciences

Tempe, AZ

2000-2002

Biochip Production Operations and Lab Expansion/Relocation

• Project Management

• GMP Compliance and Specification Development – Over 80 GMP Compliant Operations Specifications (including facility GMP policy and procedures)

PerkinElmer / EG&G

Sunnyvale, CA

1999

• 500x500 mm Sensor Panel for x-ray imaging

• Audit of facility for yield improvement

Optical Imaging Systems

Northville, MI

1991-1995

• Specification, design and supervision of utility systems and fit-up of equipment.

• Team coordination, quality assurance, and documentation.